• UK users: Due to a formal investigation into this site by Ofcom under the UK Online Safety Act 2023, we strongly recommend using a trusted, no-logs VPN. This will help protect your privacy, bypass censorship, and maintain secure access to the site. Read the full VPN guide here.

  • Hey Guest,

    Today, OFCOM launched an official investigation into Sanctioned Suicide under the UK’s Online Safety Act. This has already made headlines across the UK.

    This is a clear and unprecedented overreach by a foreign regulator against a U.S.-based platform. We reject this interference and will be defending the site’s existence and mission.

    In addition to our public response, we are currently seeking legal representation to ensure the best possible defense in this matter. If you are a lawyer or know of one who may be able to assist, please contact us at [email protected].

    Read our statement here:

    Donate via cryptocurrency:

    Bitcoin (BTC): 34HyDHTvEhXfPfb716EeEkEHXzqhwtow1L
    Ethereum (ETH): 0xd799aF8E2e5cEd14cdb344e6D6A9f18011B79BE9
    Monero (XMR): 49tuJbzxwVPUhhDjzz6H222Kh8baKe6rDEsXgE617DVSDD8UKNaXvKNU8dEVRTAFH9Av8gKkn4jDzVGF25snJgNfUfKKNC8
W

wanttosleep

Member
Aug 8, 2023
36
I also had prepared the things for this method with eebd, but I have seen too many comments where they try it for minutes, and not "A couple of breaths" For a while I felt like this would be a peaceful and reliable way out, but I'm to scared about this method now, and ask myself. Will I pass out? If I pass out will I wake up again? Will I end up with serious brain damage?

Of course I want to leave this world physically peaceful, but not at the expense of reliability. I feel so stuck.
I think the problem is none of this is standard and item being used not for their intended purpose and as such it could be a your mileage may vary situation based on where you source your parts and what kind and purity of gas because the principal behind it is sound. I think the take way is test your setup not that this doesn't work reliably. I am definitely still keep going with inert gas but I am definitely gonna try a blackout test first before the actual CTB moment.
 
  • Like
Reactions: DeadHead
W

winterparty

Student
Jul 29, 2023
145
I just tried to CTB and failed I didn't even black out. Which means there is still too much oxygen. I had bought a oxygen meter and placed it in the eebd hood and It dropped to 1% and stayed steady there, is that not enough to at least cause blackout? It seemed that it was at least low enough to give a killer headache but my vision and hearing remained about the same I had it on I think about a minute or two before I panicked and pulled off the hood. I checked the hose connections with soapy water and didn't notice any leaks. I think it might be the hood and my breathing sucking in air from outside where the face mask interface is.
What hood did you use ?
 
W

winterparty

Student
Jul 29, 2023
145
how long exactly does it take from the moment you put on the nitrogen-inflated hood until you lose consciousness?
 
R

RazorWing

Member
Oct 16, 2023
15
How do you do a blackout test with the eebd hood?
 
  • Like
Reactions: DeadHead
F

Falling Slowly

Student
Sep 9, 2023
133
Eebd hood from the Chinese website.
You said in a previous post that you bought a hood without a hose attached. How did you eventually hook up the hose? Did you attach it to a valve on the front of the hood? Or did you attach it to the inside of the hood like people do with a plastic exit bag?
Or did you get a different hood with a hose already attached?
 
W

wanttosleep

Member
Aug 8, 2023
36
You said in a previous post that you bought a hood without a hose attached. How did you eventually hook up the hose? Did you attach it to a valve on the front of the hood? Or did you attach it to the inside of the hood like people do with a plastic exit bag?
Or did you get a different hood with a hose already attached?
Different hood
 
O

outrider567

Visionary
Apr 5, 2022
2,813
how long exactly does it take from the moment you put on the nitrogen-inflated hood until you lose consciousness?
You're supposed to pass out in less than a minute--If you don't then something is wrong--Also, depends on your LPM--Das Nichts is the only poster here who passed out, at 25 LPM, so you have to ask him how long that took
 
F

Falling Slowly

Student
Sep 9, 2023
133
I found this cylinder from xxxx. would this be enough to kill me?
According to the data sheet it has a volume of 49 litres, way more than you need (it weighs 60kg/132 lbs).

5 -10 litres is all you need.
 
Last edited by a moderator:
  • Like
Reactions: asian.neet
L

Lion_50

Member
May 6, 2020
80
Deleted
 
Last edited:
  • Aww..
Reactions: asian.neet
F

Falling Slowly

Student
Sep 9, 2023
133
Rip

For context since my picture was deleted it was an internet listing of a tank that said helium 300 or smth and I didn't know how much I needed or what that meant
Yeah, the different types of cylinder measurements can be confusing. There's usually info on the website, often giving the water volume, which was 49 litres in that case. Volume of compressed gas is different, multiply the water volume by the bar pressure of the cylinder to get the approximate compressed gas volume.

On this thread, like I said, people usually recommend a cylinder volume (water volume) of at least 5 litres.
 
  • Like
Reactions: DeadHead
R

randal_bond

Me encantaria practicar ES con Hispanohablantes.
Oct 23, 2018
288
I wonder if there're any threads where the exit bag attempt has been successful. I see so many posts here where people fail. Never saw a successful one. I guess the gas is diluted.
 
  • Like
Reactions: DeadHead
W

wanttosleep

Member
Aug 8, 2023
36
I wonder if there're any threads where the exit bag attempt has been successful. I see so many posts here where people fail. Never saw a successful one. I guess the gas is diluted.
Well it is kind of hard to post it worked if it was successful.
 
  • Like
  • Yay!
Reactions: thegoldengirls, DeadHead and thewalkingdread
F

Falling Slowly

Student
Sep 9, 2023
133
I wonder if there're any threads where the exit bag attempt has been successful. I see so many posts here where people fail. Never saw a successful one. I guess the gas is diluted.

There definitely has been successful cases mentioned in this thread before, mostly either using SCBA/SCUBA setups or via a hood. Obviously it's hard to know whether people successfully ctb or just disappeared from the website.

The PPH talks more about the exit bag method.
 
W

winterparty

Student
Jul 29, 2023
145
so you have an example: I will CTB today using this method. If I don't show up again, it works.
 
  • Hugs
  • Like
Reactions: DeadHead, ClownWorld2023 and thewalkingdread
asian.neet

asian.neet

Specialist
Oct 13, 2023
307
I found another cylinder with 8 liters of nitrogen and its significantly lighter to carry than the other container I found. Would that be enough?
 
R

Readytogohome

Member
May 25, 2023
80
Good day my friends, might I ask your advice? I have the clickstyle regulator recommended by GasMonkey for US residents. I also have the yellow EEBD hood from China. My question is which exact coupler/adapter is needed to connect the hose to the regulator, I'm a granny who is hopeless with fittings and such. Here is what the hose connection looks like. Thank you!
 

Attachments

  • IMG_0112.jpeg
    IMG_0112.jpeg
    2.1 MB · Views: 0
  • IMG_0115.jpeg
    IMG_0115.jpeg
    2.3 MB · Views: 0
  • Like
Reactions: DeadHead
sensenmann

sensenmann

this will be the end of me
Jun 14, 2023
141
I found another cylinder with 8 liters of nitrogen and its significantly lighter to carry than the other container I found. Would that be enough?
It is enough, how much liters does the other container have?
 
F

Falling Slowly

Student
Sep 9, 2023
133
Good day my friends, might I ask your advice? I have the clickstyle regulator recommended by GasMonkey for US residents. I also have the yellow EEBD hood from China. My question is which exact coupler/adapter is needed to connect the hose to the regulator, I'm a granny who is hopeless with fittings and such. Here is what the hose connection looks like. Thank you!

Hard to tell what kind of connection you have just by looking at the pic. It looks like a different connection to the hood I have, so it may not fit a Rectus 95 ks coupler that fits my hood hose. Or the Draeger CEJN 344 series coupler that fits some Draeger hoods (female 1/4" NPT in U.S.). For U.S. regulators I think you also need an adaptor to go between the coupler and the regulator connection. (CGA 032 to 1/4" NPT adapter?).

Might be just easier to cut the connector off the hose and connect it directly to the regulator connection with a hose clamp like this :
1699053596310
 
  • Like
Reactions: Readytogohome
W

wanttosleep

Member
Aug 8, 2023
36
Good day my friends, might I ask your advice? I have the clickstyle regulator recommended by GasMonkey for US residents. I also have the yellow EEBD hood from China. My question is which exact coupler/adapter is needed to connect the hose to the regulator, I'm a granny who is hopeless with fittings and such. Here is what the hose connection looks like. Thank you!
https://sanctioned-suicide.net/threads/nitrogen-gas-with-eebd-hood-guide-inert-gas-method.122159/ I suggest checking this out
 
C

ClownWorld2023

Arcanist
Sep 18, 2023
472
How do you do a blackout test with the eebd hood?

It's too risky to do a blackout test with an EEBD hood if you ask me.


I will use a regular plastic bag for this when I do a blackout test later.

I found another cylinder with 8 liters of nitrogen and its significantly lighter to carry than the other container I found. Would that be enough?

It should be enough.

What's the working pressure of the cylinder? (In bar, or psi)

Good day my friends, might I ask your advice? I have the clickstyle regulator recommended by GasMonkey for US residents. I also have the yellow EEBD hood from China. My question is which exact coupler/adapter is needed to connect the hose to the regulator, I'm a granny who is hopeless with fittings and such. Here is what the hose connection looks like. Thank you!


It can be difficult to identify the connector / thread type that's used for the EEBD hood.
You'd need to take accurate measurements of the connector, the thread and the hose.

Is it possible to contact the supplier and ask them what the hose connector type is?
 
Last edited:
  • Like
Reactions: Readytogohome and RazorWing
R

RazorWing

Member
Oct 16, 2023
15
It's too risky to do a blackout test with an EEBD hood if you ask me.


I will use a regular plastic bag for this when I do a blackout test later.
Thank you for feedback. I did think the EEBD would be very risky as it's designed to fit semi-snug around the next so if you blackout, how is it going to fall off.

How is a plastic bag any less risky?

I understand the SCBA blackout as your just holding the mask on until you blackout and as soon as you do the mask will fall off and you will breath normal oxygen again.
 
C

ClownWorld2023

Arcanist
Sep 18, 2023
472
Thank you for feedback. I did think the EEBD would be very risky as it's designed to fit semi-snug around the next so if you blackout, how is it going to fall off.

How is a plastic bag any less risky?

I understand the SCBA blackout as your just holding the mask on until you blackout and as soon as you do the mask will fall off and you will breath normal oxygen again.

The EEBD is too risky, because you might not be able to remove it in time.
In the case of the plastic bag, it can be easily removed or even completely ripped off should something go wrong regardless.


You'd do the same procedure as if you were going to ctb with a few adjustments.
You don't adjust the elastic cord, and instead will hold the bag with both of your hands.

You hyperventilate during the time it takes to pre-fill the bag.
Once it's fully inflated, you stop the regulator flow and pull it down and hold the bag with both hands.

Breathe for about 15-30 seconds until you black out.
Your hands should let go of the bag after blacking out.


NOTE: I have not tried this myself yet, but will do so later.
I suggest waiting for my result before trying it yourself, in case my method doesn't work or proves to be dangerous.
 
  • Like
Reactions: Mare Imbrium
sensenmann

sensenmann

this will be the end of me
Jun 14, 2023
141
Thank you for feedback. I did think the EEBD would be very risky as it's designed to fit semi-snug around the next so if you blackout, how is it going to fall off.

How is a plastic bag any less risky?

I understand the SCBA blackout as your just holding the mask on until you blackout and as soon as you do the mask will fall off and you will breath normal oxygen again.
The SCBA blackout is good but you will lose some gas.
 
Last edited:

Similar threads

S
Replies
2
Views
183
Suicide Discussion
Queen B
Q
T
Replies
5
Views
372
Suicide Discussion
timechained
T
A
Replies
2
Views
484
Suicide Discussion
anh tran
A
Fennec123
Replies
5
Views
309
Suicide Discussion
AllAloneAndSad
A
K
Replies
16
Views
1K
Suicide Discussion
devils~advocate
devils~advocate