rebreather.

[Wyldfyre4948]

Have you managed an airtight seal, and have you put in the full apparatus to get a feel for it? Is it comfortable? Any test runs?

 

[jacrispy]

They should be molded along the side in the clear plastic below the blue cap there. (As opposed to contrasted white numbering like what's pictured in manual/concept pics). Sure they aren't there and just hard to see at first? Haven't gotten to look at mine closely yet

I still don't see them

Dude... please make a live stream and invite us all when you do it...that way we know if it works or not...

I don't even know how I'd do that honestly

Have you managed an airtight seal, and have you put in the full apparatus to get a feel for it? Is it comfortable? Any test runs?

I got the seal. had to shave my beard off. it's not uncomfortable, just very tight around the head. no test runs as I only have one canister of nitrogen and you're expected to pass out after 3 breaths so there would be no way for me to report back.

 

[Dolphin55]

Maybe not a livestream, too complicated, but a video/zoom call with someone you trust from this site who can report back what happens. I think someone who took SN did that. It's a lot to ask though for both you and the witness, obviously. I hope you're sure of your decision to ctb, and if you are I hope it goes to plan and you can find peace

 

[jacrispy]

Maybe not a livestream, too complicated, but a video/zoom call with someone you trust from this site who can report back what happens. I think someone who took SN did that. It's a lot to ask though for both you and the witness, obviously. I hope you're sure of your decision to ctb, and if you are I hope it goes to plan and you can find peace

I've messaged a few people on here but no one has expressed interest in this until now. guess it would depend on someone volunteering more than anything because asking someone "hey, wanna watch me die?" seems in poor taste. thank you for the support regardless

 

[John Ryder]

I still don't see them

Hm, weird. I hope they're there...that would suck. I'll try and look when I can...just received and haven't had a chance to properly break it all out yet

 

[jacrispy]

Hm, weird. I hope they're there...that would suck. I'll try and look when I can...just received and haven't had a chance to properly break it all out yet

if you do find them please report back. I'm trying to keep up with everyone's questions and DMs but it's getting a bit overwhelming. would be nice to have someone else's input.

 

[Dolphin55]

I've messaged a few people on here but no one has expressed interest in this until now. guess it would depend on someone volunteering more than anything because asking someone "hey, wanna watch me die?" seems in poor taste. thank you for the support regardless

I'd do it, but I'm a very socially/generally anxious person and probably wouldn't be a calming presence for you lol. Plus I live with other people, and so unless they happen to be out at the time you wanna ctb it wouldn't work

 

[jacrispy]

I'd do it, but I'm a very socially/generally anxious person and probably wouldn't be a calming presence for you lol. Plus I live with other people, and so unless they happen to be out at the time you wanna ctb it wouldn't work

definitely not looking to traumatize anyone or make you anxious.

 

[indocanda]

definitely not looking to traumatize anyone or make you anxious.

When you are planning for ctb?

 

[jacrispy]

When you are planning for ct

When you are planning for ctb?

not entirely sure.

 

[_nohope_]

This method seems a lot easier than the other inert gas methods. Would someone be so kind and message me a link to the seller and also tell name me a suitable Nitrogen supplier for Europe. Thanks

 

[BaronVon]

I had purchased the previous 2 versions of this , in summary was a complete waste of money , I have no doubt the inventors intentions are sincere and honest , but they were proven not to work . I would urge a wait and see approach on purchase of this myself

 

[Walilamdzii]

I had purchased the previous 2 versions of this , in summary was a complete waste of money , I have no doubt the inventors intentions are sincere and honest , but they were proven not to work . I would urge a wait and see approach on purchase of this myself

That's disappointing, what were the faults?

 

[jacrispy]

This method seems a lot easier than the other inert gas methods. Would someone be so kind and message me a link to the seller and als

I had purchased the previous 2 versions of this , in summary was a complete waste of money , I have no doubt the inventors intentions are sincere and honest , but they were proven not to work . I would urge a wait and see approach on purchase of this myself

the main difference is that instead of soda lime canisters you're using inert gas which is supposed to be much more effective and lessen the time necessary to achieve unconsciousness. obviously since you've purchased the other 2 versions your word holds much more weight than mine, I'm just sharing my experience and offering tips along the way.

 

[Prime0]

What is the last situation?

 

[indocanda]

This is more compact inert gas setup, so prefer this over exit bag and big cylinder. I'm will buy this once @jacrispy confirm that this gonna work

 

[MBG]

I had purchased the previous 2 versions of this , in summary was a complete waste of money , I have no doubt the inventors intentions are sincere and honest , but they were proven not to work . I would urge a wait and see approach on purchase of this myself

Please provide/link evidence that proved they did not work?

 

[Zeusman8506]

Please provide/link evidence that proved they did not work?

I purchased one be here Tuesday next week jacrispy has gone above and beyond sharing his experience. It will be about 8 days before i use it. I did buy an extra cylinder so i can do some testing.

 

[Wyldfyre4948]

Does it recycle the air you exhale and filter out the co2? Just trying to figure out how it would work after the gas in the cartridge is spent.

 

[jacrispy]

Does it recycle the air you exhale and filter out the co2? Just trying to figure out how it would work after the gas in the cartridge is spent.

by the time the cartridge is empty you'll be dead. knocked out after 2 breaths or 15 seconds and death occurs after 5-6 minutes. it's 99% purity.

Does it recycle the air you exhale and filter out the co2? Just trying to figure out how it would work after the gas in the cartridge is spent.

by the time the cartridge is empty you'll be dead. knocked out after 2 breaths or 15 seconds and death occurs after 5-6 minutes. it's 99% purity.

 

[Wyldfyre4948]

This may be my new primary method and SN will be the back up.

 

[Techef]

I got the seal. had to shave my beard off. it's not uncomfortable, just very tight around the head.

How were you able to confirm you got a 100% airtight seal? IIRC, achieving an airtight seal was one of the issues with the previous 2 versions. I get the feeling it'll be a bit of a gamble, since they provide you with 3 mask sizes, and hopefully one of them conforms to one's facial structure just right. I wonder if you can ask for refund if it doesn't work lol.

I'd love this mostly for its portability. The IG setup I'm trying to put together now is portable in the sense I could fit it in a suitcase, so if I wanted to CTB somewhere other than my apartment it'd probably need to be a hotel/motel. But lately I've been wanting to take one last trip to nature where it's quiet, peaceful, remote (for personal reasons, I'd like to "go missing" or at least delay when authorities find my corpse for as long as possible), so I can enjoy my journey. Ideally my body wouldn't be found until it returned to the earth like it's supposed to.

Wondering why shipping cost has gone up almost 2x from the last time I took a look at this.

 

[Zeusman8506]

This may be my new primary method and SN will be the back up.

That's my plan

 

[Minsu]

This may be my new primary method and SN will be the back up.

I second this too

 

[sanctions]

Anyone willing to try the 'blackout test' on the rebreather?

Inert gas method test

Have you ever tried to pass out with exit bag and inert gas? ( Obviously I mean, with somebody else present to remove the bag after fainting. Or holding the bag with your hands in front of your nose and mouth... ) What does it feel like?

sanctioned-suicide.net

 

[Csmith8827]

'blackout test'

???

 

[sanctions]

I've read of a person on here testing his mask by just holding it against his face without having the head straps around the back of his head. He did pass out and fall forward and hit his head. I think he gave a warning about doing this test because he was quite out off it from just a test. Think this person was on his own when testing.

 

[jacrispy]

How were you able to confirm you got a 100% airtight seal? IIRC, achieving an airtight seal was one of the issues with the previous 2 versions. I get the feeling it'll be a bit of a gamble, since they provide you with 3 mask sizes, and hopefully one of them conforms to one's facial structure just right. I wonder if you can ask for refund if it doesn't work lol.

I'd love this mostly for its portability. The IG setup I'm trying to put together now is portable in the sense I could fit it in a suitcase, so if I wanted to CTB somewhere other than my apartment it'd probably need to be a hotel/motel. But lately I've been wanting to take one last trip to nature where it's quiet, peaceful, remote (for personal reasons, I'd like to "go missing" or at least delay when authorities find my corpse for as long as possible), so I can enjoy my journey. Ideally my body wouldn't be found until it returned to the earth like it's supposed to.

Wondering why shipping cost has gone up almost 2x from the last time I took a look at this.

I put the straps on, applied the mask to it and put my hand over the hole where the tubing would be connected. while breathing in and out with my hand over it I ran out of air very quickly and had trouble breathing. the mask was fully inflated with the included syringe. there is also a neck and waist strap included to ensure the device doesn't fall off after passing out. I don't have any information as to why shipping costs have gone up, but it definitely weighs quite a bit. it also shipped from china via DHL.
hi everyone,
been trying to keep up with messages, posts in this thread etc. as of right now I believe I'm caught up. if I missed your message or you're awaiting a response from me regarding a question in the thread please let me know. as of right now I'm still the only one to have received and tested the device so there are a lot of requests. if you are looking for a link to purchase, it was posted earlier in the thread. the instruction manual is in the thread as well. due to demand, I can no longer keep fulfilling requests for a link to purchase or asking where the instruction manual is located.

Anyone willing to try the 'blackout test' on the rebreather?

Inert gas method test

Have you ever tried to pass out with exit bag and inert gas? ( Obviously I mean, with somebody else present to remove the bag after fainting. Or holding the bag with your hands in front of your nose and mouth... ) What does it feel like?

sanctioned-suicide.net

there is no way for me to do this alone and I don't have anyone who has volunteered to assist

 

[indocanda]

@jacrispy as I know u shaved ur beard to achieve airtight seal. I have light beard. I don't wanna shave what you think am i able to airtight the mask?

 

[jacrispy]

@jacrispy as I know u shaved ur beard to achieve airtight seal. I have light beard. I don't wanna shave what you think am i able to airtight the mask?

you're going to need to shave it, there's no way around it. the beard hair will prevent the straps from completely touching your face and will also interfere with the tightening of the mask. if you've got a beard that's more than stubble the chances of failure are going to be much higher.