Method Exit bag and inert gas megathread

[Techef]

My god this is turning out to be an absolute pain in the ass. Spent the entire day calling every welding and brewing shop, chain or local. Aside from AirGas, all of the other places no longer do business with individuals, only licensed businesses.

 

[anonaon]

My god this is turning out to be an absolute pain in the ass. Spent the entire day calling every welding and brewing shop, chain or local. Aside from AirGas, all of the other places no longer do business with individuals, only licensed businesses.

Where are you from? Maybe you can buy a cylinder online

 

[Techef]

Where are you from? Maybe you can buy a cylinder online

US. I guess I could purchase an unncessarily large 125 cu/ft cylinder that's already filled, which weighs 70 pounds (31 kg)...

 

[puffnstuff]

Will this regulator work with this tank?

Nitrogen (N2) 550 Liter Cylinder 99.999% Pure
550 Liter Cylinder (E)
Contents: 550 liters (19.5 cu. ft.)
Pressure: 2200 PSIG
Outlet: CGA 580
Weight: 12.9 lbs.
Dimensions: 4 1â"6" x 20 1â"2"
D.O.T. Specs: E8990 NRC
Disposable tank

Regulator

CGA580 Argon CO2 Regulators, Argon Gauges Gas Welding Regulator Compatible with Mig Tig Miller Lincoln Weld 0-4500PSI / 0-10BAR - CO2 Argon Regulator with 6.6Ft Hose

 

[GasMonkey]

Will this regulator work

Yep, it has a flow gauge so you can set the flow rate, but if you are in a CGA-580 region it would be better to get a click-style regulator like these ones:

Contents: 550 liters (19.5 cu. ft.)

At 15 LPM that's 36 minutes, is enough.

Aside from AirGas, all of the other places no longer do business with individuals, only licensed businesses.

So amateur welders can only get inert gas cylinders at AirGas?

I guess I could purchase an unncessarily large 125 cu/ft cylinder that's already filled, which weighs 70 pounds (31 kg)...

@outrider567 and @shadowfinal311 have that cylinder.

 

[NoFutureAnymore]

I want to start with thanking everyone who contributed to this megathread, especially @GasMonkey . It contains a lot of useful information and gives me confidence in the inert gas method. I am not planning to ctb at the moment but I like to have options in life in case things go down even more. So I want to build and test a SCBA or SCUBA (PP) setup. Preferable this one from GasMonkey since EM isn't available anymore. I will decide on SCBA or SCUBA later depending on the availability.

But first I want to buy a gas cylinder in physical store and not online. The postal service is currently unreliable, and I prefer not to have the package delivered to the neighbors. They are already suspicious since they know what terrible things happened to me. Or is the content of the package from the source in PPeH unidentifiable? Does anybody have experience with buying nitrogen in a (welding) store in The Netherlands? I know it's not allowed to name sources so I will use code names. I am currently looking into "SG". I would appreciate a PM very much since I can't find any experiences in buying Nitrogen in The Netherlands.

 

[GasMonkey]

looking into "SG"

I don't know any "SG" source of Nitrogen cylinders. The source recommended in the PPH Essentials for EU (GD, from Germany) is extremely good and they are shipping cylinders abroad again (in the past they stopped doing it for some reason).​

is the content of the package from the source in PPeH unidentifiable?

The last cylinder I bought from them had this sticker in the box:

A previous cylinder that I bought from Amazon didn't have any sticker tho.

 

[NoFutureAnymore]

I don't know any "SG" source of Nitrogen cylinders.

It's an exchange system with multiple exchange points throughout The Netherlands. You pay a onetime fee to get into the system and some money for exchanging a cylinder to a full one. But I can't find much information about quality of the gas and how easy it is for a private person to get a cylinder there. But it would be good if it's possible to refill them after testing or when they are empty for other reasons. I'll send you a pm with the name.

The last cylinder I bought from them had this sticker in the box:

Yeah that's what I am afraid of. Packages are delivered to the neighbors when you aren't home. This sticker in combination with the name of the sender could raise suspicion at my neighbor. He is smart and knows the situation...

 

[FailerQt.]

Hello, I am finally at a point when I'll be able to start collecting needed stuff for this method. I just want to double check since it's not the cheapest one. Is this the correct thing I need to see flow?
Technical parameters: (I'll just copy paste what the site says, translated into english obviously)
"Bottle reducing valve for nitrogen. The valve is equipped with an inlet pressure gauge (for cylinder pressure) and an outlet float flowmeter (for gas flow in l/min).
Inlet pressure 200 bar
Flow rate 3 - 30 l/min
Connection inlet W 24.32 x 1/14"
Connection output G 1/4""

I apologise if this was asked here before, but there are way too many pages at this point and as I said I'll rather double or even triple check as this alone costs 200€.
Thanks in advance for any help/advice ^^

 

[GasMonkey]

Is this the correct thing I need to see flow?

Yeah that regulator is viable for any constant flow setup.

This one from GD (the gas source recommended in the PPeH for EU) is 139 €:

 

[ztem]

Connection output G 1/4"

Since your flowmeter does not have a hose barb,you must buy it separately.
Make sure you buy female stainless steel or brass 1/4 G thread(BSPP) straight hose barb for your flowmeter Outlet.

Hose Barb Fittings G-Threads Female PN40

Shop Hose Barb Fittings G-Threads Female PN40 Products online today. Fast delivery, great prices, wide selection, and engineering support ready to help!

tameson.com

Don't buy NPT hose barb because male and female NPT hose barbs are for American regulators/flowmeters(CGA regulators/flowmeters), Your regulator/flowmeter is European(DIN standard),therefore,the outlet of your regulator has a G(BSPP) thread.

How to differentiate between BSPP, BSPT, NPT threads Redfluid

Here is a definitive guide to differentiate between BSPP (or GAS), BSPT, and NPT threads to help you get the best thread selection.

redfluid.es

A hose barb has two sides,the barbed side and the thread(male or female thread) side(the thread side has different standards such as NPT for US and Canada,BSPP(also called G thread)and BSPT for Europe.

The size of the barbed side depends on the ID size (inner diameter size)of the hose you want to use( for example Vizzy used 1/4 hose(6.3 mm ID size and 13.5mm OD size)) and the size of the thread side depends on the OD size(outside diameter size)of your regulator/flowmeter male outlet thread(your flowmeter is G 1/4 as you said)

Also 2 hose barbs(1 male and 1 female)+teflon tape+ 2 hose clamps or 2 air hose ferrules are used to connect two hoses together(Like Vizzy did).

Nitrogen gas with EEBD hood Guide (Inert gas Method)

NITROGEN GAS WITH EEBD HOOD (INERT GAS METHOD) before I start this guide, let’s be honest this method is expensive (approximately 600 to 800 dollars)and you need minimum 1 -2 months to source the equipments and nitrogen gas cylinder. My tip for you to do it cheap, purchase the Chinese products...

sanctioned-suicide.net

The flowmeter that GasMonkey suggested has a hose barb,so you don't need to worry about buying the right size hose barb but you should worry about buying a hose with the right ID size for the hose barb of that flowmeter

 

[iamdonewiththis]

Is there a place on the open internet or dark web to source a reliable exit bag?

 

[ztem]

Is there a place on the open internet or dark web to source a reliable exit bag?

Even the garbage bag in your home can be a reliable exit bag.

Exit bag and inert gas megathread

hmm i've heard they only sell toasters to the most experienced professionals but this could this be the new meta. someone contact Philip Nitschke asap Very funny

sanctioned-suicide.net

and no, I don't recommend you to be careless about your exit bag,you still have to make a good one, I just showed that people did it with simple stuff and you don't have to worry too much about making your own exit bag

 

[FailerQt.]

The flowmeter that GasMonkey suggested has a hose barb,so you don't need to worry about buying the right size hose barb but you should worry about buying a hose with the right ID size for the hose barb of that flowmeter

Thanks for the detailed information. I'll be going for the one GasMonkey mentioned. The only issue is that the source is only in German so I am a bit worried if they'll deliver it to my country.

 

[iamdonewiththis]

Even the garbage bag in your home can be a reliable exit bag.

I wouldn't say it's reliable, even if it did work. I read many posts here about how to make one and I still can't quite figure it out. I also read more than a few reports on failures due to poorly constructed exit bags, so if there's a reliable ready solution, I'm happy to pay for it

 

[outrider567]

I wouldn't say it's reliable, even if it did work. I read many posts here about how to make one and I still can't quite figure it out. I also read more than a few reports on failures due to poorly constructed exit bags, so if there's a reliable ready solution, I'm happy to pay for it

I couldn't figure it out either

 

[ztem]

I wouldn't say it's reliable, even if it did work. I read many posts here about how to make one and I still can't quite figure it out. I also read more than a few reports on failures due to poorly constructed exit bags, so if there's a reliable ready solution, I'm happy to pay for it

So:

GasMonkey Setup [Nitrogen SCBA]

🐵 GasMonkey Setup 🐵 [Nitrogen SCBA] Positive Pressure Self-Contained Breathing Apparatus **images have been edited to ensure anonymity** Front view Side view Back view Pressure gauge Lung Demand Valve and Mask Bluetooth pulse oximeter Cylinder attachment Cylinder's connection...

sanctioned-suicide.net

or

Nitrogen gas with EEBD hood Guide (Inert gas Method)

NITROGEN GAS WITH EEBD HOOD (INERT GAS METHOD) before I start this guide, let’s be honest this method is expensive (approximately 600 to 800 dollars)and you need minimum 1 -2 months to source the equipments and nitrogen gas cylinder. My tip for you to do it cheap, purchase the Chinese products...

sanctioned-suicide.net

 

[GasMonkey]

I am a bit worried if they'll deliver it to my country

In their eBay it says that they ship to the European Union.

 

[puffnstuff]

I couldn't figure it out either

Somewhere in this thread I read about using a turkey roasting bag (they are pretty thick) and an elastic sweat band or hair band for around the neck. It needs to be snug around the neck but not too tight (they say two fingers should fit under, enough for air to flow out) I think that this is the setup I am going to use as the masks and hoods are too complex for me.

 

[GasMonkey]

I also read more than a few reports on failures due to poorly constructed exit bags

There isn't a single medical report of somebody failing with inert gas, and by failing I mean surviving with permanent damage. I guess you are talking about people who removed the bag before fainting and they call that a "fail".

There is a PDF with instructions to craft an ExitBag linked in the on-line version of the PPeH.​

 

[MBG]

The R2D ReBreather lll
$250 for the device + $45 for S/H

R2D ReBreather III

r2d.respiro.global

$40 for Nitrogen cartridges (Amazon)

It's a LOT cheaper than "a short stay in Switzerland."

June 2023 DeBreather Update - Now Available - Exit International

Share this ContentThe June 2023 Peaceful Pill eHandbook Essentials Update brings important news on the 3rd and latest rendition of the R2D De Breather device. Since 2017, the Inventor of the ReBreather – DeBreather – Richard Avocet – has worked long and hard at making a device that allows for a...

www.exitinternational.net

 

[outrider567]

Somewhere in this thread I read about using a turkey roasting bag (they are pretty thick) and an elastic sweat band or hair band for around the neck. It needs to be snug around the neck but not too tight (they say two fingers should fit under, enough for air to flow out) I think that this is the setup I am going to use as the masks and hoods are too complex for me.

Yeah, that's what I was using, a turkey roasting bag and an elastic sweat band, before I eventually switched to Nitrogen and a hood

 

[Γyuk]

The R2D ReBreather lll
$250 for the device + $45 for S/H
$40 for Nitrogen cartridges (Amazon)

It's a LOT cheaper than "a short stay in Switzerland."

June 2023 DeBreather Update - Now Available - Exit International

Share this ContentThe June 2023 Peaceful Pill eHandbook Essentials Update brings important news on the 3rd and latest rendition of the R2D De Breather device. Since 2017, the Inventor of the ReBreather – DeBreather – Richard Avocet – has worked long and hard at making a device that allows for a...

www.exitinternational.net

The website of the company that sells the ReBreather seems to be down or do I have the wrong adress?

 

[MBG]

The website of the company that sells the ReBreather seems to be down or do I have the wrong adress?

I just added their link to my post. I assume we're allowed to link sellers/sources.

Here it is again:

R2D ReBreather III

r2d.respiro.global

 

[iamdonewiththis]

@ztem I appreciate the link though that seems even more complicated than the exit bag itself.

There's no where to get a ready made exit bag?

 

[ztem]

NO

 

[ApparentlyNot]

there is this video called "Doing It with Betty" where an elderly woman shows how to make a simple exit bag using an oven bag. Is there an issue with this type of exit bag?

here is a link to the video: https://video.fc2.com/en/content/20080907xBXkA7vE
but I was able to find it by just googling it if you don't trust my link

 

[iamdonewiththis]

Any thoughts on this EEBD hood?

EEBD Hood - SHANGHAI FANGZHAN FIRE TECHNOLOGY CO., LTD

EEBD hood with hose

www.thefzsafety.com

 

[anonaon]

Any thoughts on this EEBD hood?

EEBD Hood - SHANGHAI FANGZHAN FIRE TECHNOLOGY CO., LTD

EEBD hood with hose

www.thefzsafety.com

Quite a few of us here including me have the EEBD hood. Its very good. @outrider567 has done multiple tests with it & can confirm that it works. Its better than an exit bag cuz its has an exhalation valve & is much sturdier (though exit bag is also viable). Theres a source on Alibaba who selles the hood for only $20 USD without the cylinder but the connection if different so youll have to modify it to that of your regulator

 

[mando]

The R2D ReBreather lll
$250 for the device + $45 for S/H

R2D ReBreather III

r2d.respiro.global

$40 for Nitrogen cartridges (Amazon)

It's a LOT cheaper than "a short stay in Switzerland."

June 2023 DeBreather Update - Now Available - Exit International

Share this ContentThe June 2023 Peaceful Pill eHandbook Essentials Update brings important news on the 3rd and latest rendition of the R2D De Breather device. Since 2017, the Inventor of the ReBreather – DeBreather – Richard Avocet – has worked long and hard at making a device that allows for a...

www.exitinternational.net

Debreather looks like a great solution, IF? they ship to Europe I wonder if customs would be a problem?