Hello, I was wondering what is the success rate for doing the nitrogen method? I think buying a 100% pure nitrogen tank with a scuba diving mask and a hose so i can attach it to the tank and mask is viable. Any thoughts?
-
Hey Guest,
If you want to donate, we have a thread with updated donation options here at this link: About Donations
As long as you really have no acess to oxygen while in there it should work 100% of the time. Only potential problems are SI and/or leaks in the tank/chamber.
Ok, idk i recently looked up the items and surprisingly, you can buy these from amazon but i'm just wondering if this will actually work because I heard that you can pass out in just a few minutes from inhaling pure nitrogen. I don't want to screw up anything and I don't know if my SI will kick in.
Other thing to watch out for is not getting interrupted (cause of death should be asphyxiation without the pain) but you can also consult the megathread of inert gases
GasMonkey
Nitrogen Master Race
- May 15, 2022
- 1,884
The method has been probably used by hundreds of thousands of people (or even more) and I haven't seen a single medical report of somebody surviving (barring out the ones who were rescued by another person immediately obviously). Go imagine.
SCUBA is one of the possible viable implementations, it has been used before, altough it isn't really the best implementation (SCBA is better). The EEBD hood is also really good an much cheaper.
You faint in a few seconds (in a few breaths), death in a few minutes. It's very common for people to black out without even noticing while testing their equipment.
Thank you for the information. I'm just honestly really scared to go through with this plan as i have a fear of failing it and possibly be in a much worser state. I have to successfully do this in one attempt. I'm slowly losing hope but I would really love to believe even in the slightest that there is hope or God watching over us. ANYTHING.
Hi All,
I am hoping to get some help on making my suicide hood. I have bought an xxL roasting turkey bag as suggested in the peaceful pill book by EXIT Int. I have another thicker plastic big bag too. One for removing furniture. I shall cut to size. My thought is would if I use both....the likely hood of leaks would be minimized? It's just securing the elastic around - I have bought elasticated shoe laces with a clasp to secure the bottom. The length is long enough. I am just struggling to put it all together, and forgive my ignorance but I don't understand why the need for the two-finger gap at the bottom of the hood? Is this to secure the tubing? Can I use duct tape or will this tear the plastic?
I am worried if I get the mask it may be too big and therefore oxygen may interrupt my passing leading to a failed attempt. This cannot be a failed attempt.
Thank you and much appreciated
I am hoping to get some help on making my suicide hood. I have bought an xxL roasting turkey bag as suggested in the peaceful pill book by EXIT Int. I have another thicker plastic big bag too. One for removing furniture. I shall cut to size. My thought is would if I use both....the likely hood of leaks would be minimized? It's just securing the elastic around - I have bought elasticated shoe laces with a clasp to secure the bottom. The length is long enough. I am just struggling to put it all together, and forgive my ignorance but I don't understand why the need for the two-finger gap at the bottom of the hood? Is this to secure the tubing? Can I use duct tape or will this tear the plastic?
I am worried if I get the mask it may be too big and therefore oxygen may interrupt my passing leading to a failed attempt. This cannot be a failed attempt.
Thank you and much appreciated
I got my nitrogen tank today! I went into my local welding shop and told them my friend asked me to pick up nitrogen to make coffee. No further questions. It was $150 and I really don't have too much money to spend on this but I absolutely need it to work. Can I just get this hood, connect to the tank and ctb?
Vizzy
DEAD
- May 6, 2023
- 1,870
Buy a drager eebd hood, if you can
If you connect this hood, nitrogen will come from the back so where you will rest your head, when you do ctb
Buy a eebd hood where hose go in the front and make sure it has co2 outlet
befree
Time to do more enjoyable things _____Goodbye_____
- Mar 22, 2022
- 2,588
Vizzy
DEAD
- May 6, 2023
- 1,870
Not this one, this one cpap mask so nitrogen can leak
Try eBay to see anything used eebd hood available
Vizzy
DEAD
- May 6, 2023
- 1,870
Try eBay, even used one is okay
Check this out
DRAGER SAVER CF-15/10 EMERGENCY ESCAPE BREATHING DEVICE EEBD FULL FACE MASK | eBay
In All United Nation.
www.ebay.com
or this? And I still need a regulator and flowmeter right?
Incredible, thanks so much. I still need other things though, right? Sorry my brain is scrambled and I can't think really great right now.Try eBay, even used one is okay
Check this out
DRAGER SAVER CF-15/10 EMERGENCY ESCAPE BREATHING DEVICE EEBD FULL FACE MASK | eBay
In All United Nation.www.ebay.com
Vizzy
DEAD
- May 6, 2023
- 1,870
Yes everything else same, you need nitrogen cylinder, regulator with flowmeter
Vizzy
DEAD
- May 6, 2023
- 1,870
Not this one, this co2 regulator so regulator adapter will be different
Make sure the regulator fit with your cylinder value, I don't know which country you are so I don't know the nitrogen cylinder value standard in your country and make sure the flowmeter is in lpm
Vizzy
DEAD
- May 6, 2023
- 1,870
the top brass part says: NH-5803 CGA580 12N V9
also i see that it's labeled Argon so I will call them tomorrow to see when I can exchange.
Vizzy
DEAD
- May 6, 2023
- 1,870
So it is argon gas?
Nitrogen and argon have same cylinder adapters which is cga 580
The irony. I have access to 80lb of nitrogen hookups everywhere. Now not allowed back to work because I tried to ctb a normal way.
GasMonkey
Nitrogen Master Race
- May 15, 2022
- 1,884
It is, a SCBA is objectively better than the typical NP SCUBA for reasons that I have explained many times (positive pressure, zero inhalation effort).
Imagine how good a SCBAs are that I have used them with a beard, and the seal was perfect due to the protection of the positive pressure.
Absolutely not, in fact in the latest months of life of escMode I was recommending the EEBD Hood over the SCBA.
Last edited:
befree
Time to do more enjoyable things _____Goodbye_____
- Mar 22, 2022
- 2,588
Yes you "explained" or better claimed, that SCBA is better and more reliable. We had this debate several times without any agreement.
As I said before, I contacted all manufacturers of fullface scuba masks and regulators. The result of all the answers is that what you say about scuba masks (especially positive pressure) is wrong. But I don't feel like starting this debate again, because it was claimed (Greenberg) that I was misleading members anyway. Use your SCBA equipment, others use SCUBA with success.
Vizzy
DEAD
- May 6, 2023
- 1,870
Mostly you don't need to buy adapter for eebd hood
Because eebd hood adapter can be screwed easily to the nitrogen/argon regulator
GasMonkey
Nitrogen Master Race
- May 15, 2022
- 1,884
That adapter was probably modified by the supplier to fit the medical regulator, the original connector was probably different.
Similar threads
- clearheadedclarity
- Suicide Discussion
Suicide Discussion
uzuf86
Discussion
Nitrogen gas and fail safe backup?
- beardyoldcorpse
- Suicide Discussion
Suicide Discussion
beardyoldcorpse
