Trashcan
Trash
- Aug 31, 2018
- 1,234
I have done a little bit of welding, but mostly I'm a woodworker. I've picked up knowledge of gasses from people I've worked with and from being an EMT.
We appreciate you sharing your knowledge. :)
As you know, censorship around the world has been ramping up at an alarming pace. The UK and OFCOM has singled out this community and have been focusing its censorship efforts here. It takes a good amount of resources to maintain the infrastructure for our community and to resist this censorship. We would appreciate any and all donations.
Bitcoin Address (BTC): 39deg9i6Zp1GdrwyKkqZU6rAbsEspvLBJt
Ethereum (ETH): 0xd799aF8E2e5cEd14cdb344e6D6A9f18011B79BE9
Monero (XMR): 49tuJbzxwVPUhhDjzz6H222Kh8baKe6rDEsXgE617DVS
I have done a little bit of welding, but mostly I'm a woodworker. I've picked up knowledge of gasses from people I've worked with and from being an EMT.
Why don't people talk about this anymore?
Sadly, I can report from my own experience that it sometimes takes longer than you might hope --maybe a minute? And when you're stressed and afflicted with a strong human survival instinct, the time to unconsciousness can feel very, very long indeed. I've tried three times recently, and I had plenty of time to remove the bag from my head.He-method on the other hand would just knock you out almost instantly and you are dead.
I bought a tank here in the UK recently before joining here, anyway to tell if it is pure?100% he is still sold in normal markets in toy/balloons sections at least in northern Europe, Uk and Germany.
Did you buy it from a party supply store, for balloons, or from a welding/industrial supplier?I bought a tank here in the UK recently before joining here, anyway to tell if it is pure?
I bought a tank here in the UK recently before joining here, anyway to tell if it is pure?
Did you buy it from a party supply store, for balloons, or from a welding/industrial supplier?
/QUOTE]
Thanks, it's from an online store (argos ) and for balloons...
ArgosD
Should say on the website or tank, where did you buy it?
Sadly, I can report from my own experience that it sometimes takes longer than you might hope --maybe a minute? And when you're stressed and afflicted with a strong human survival instinct, the time to unconsciousness can feel very, very long indeed. I've tried three times recently, and I had plenty of time to remove the bag from my head.
I will agree, however, that it is painless. Just a bit of tingling in my hands and face, and some greyness around the edge of my vision.
Hopefully soon I will work up the courage to try again.
This is the only information on it.If Argos lables it "100% Helium," there's a good chance it is what it's labled. If it's labled "balloon gas", or has no specifics of composition, it's anyone's guess.
Perhaps someone here has experience with Argos?
Masks are a bit dicey, not just due to how well they are (or are not) secured to your face, but because you might get air intrusion. If air intrudes on someone taking O2 for sleep apnea, it's no big deal. If air intrudes on one of us, trying to ctb with an inert gas, it becomes much more problematic.Have you tested the breathing tube with face mask that is attached to your head? Have you seen plastic masks anywhere else than the one for apnea which might cost too much if you have to buy the whole thing?
I think that if it was attached well and tight to the head it wouldn't fly off as euthanasia adviser said it can do. Scuba diving masks etc. never give in any water even in high pressure so I think that plastic mask could work if it's attached so that when one is knocked out it won't come off.
Flow rate should be a reliable 15Lpm, as measured through a regulator. The hose should be firmly secured under the bag --I tie the end of my hose in with the hair elastic I use on my braid, at the nape of my neck, and that works very well. I've also found the bag leaks less if I run the hose up my back, rather than in under my chin.How much flow you had to the bag? You can't really count it but was it something like slow, medium or a lot? Did you use duct tape or lion tape? Those are really hard to get off.
@Johnnythefox it states on the website helium ballon gas, so tbh its more than likely mixed with oxygen. Most reseach ive done if it states ballon gas its been mixed or it would say 100% pure.
Maybe better to go with Argon or Nitrogen, yes costs more but easier to get pure
I am almost certain that I found videos on YouTube. They are quite good at explaining how to build an exit bag.I bet someone have made also a video on YouTube how to make it right way.
Pressurized cylinders' valves are built to an international standard --in other words, I could bring a regulator from the US to Europe and it should fit on a tank I bought in Europe. This is important for situations like big ships needing to replace their on-board shop's gas cylinders in a foreign port. However, there are no international standards for cylinder sizes and shapes, and from trying to assist people on this forum there are a bewildering variety of them. So the valves are the same, but what size tank you will need to buy is a question you'll need to research specific to the country you're in. You'll need at least 40 minutes of gas flowing at 15Lpm, so the tank must contain a minimum of 600L of compressed gas.Where did you get the regulator and how much I costs? Can it be attached to every helium tanks? Since they might be different kind in Europe and in USA for example.
They sell named "Ballooner" helium tanks in many countries in same stores. There is section where people can ask about the item and anyone can read them. So it should be always correct information that they give because people buy products based on the information they give there. Someone asked there that is it 100% helium. He got written answer that it is 100% helium. Of course someone could also email to manufacturer and ask the same. In normal stores salesmen usually don't know about their products. In welding stores they do because it really matters there.
I read sometime ago in euthanasia site that only one manufacturer started to dilute helium to 80% helium 20% air and that they should say it in tank or they can't just sell it telling it's helium when it's ingredients are helium and air.
But it may have been changed. Does anyone have more info about it? I can check the name which is not for sure 100%.
I am almost certain that I found videos on YouTube. They are quite good at explaining how to build an exit bag.
Pressurized cylinders' valves are built to an international standard --in other words, I could bring a regulator from the US to Europe and it should fit on a tank I bought in Europe. This is important for situations like big ships needing to replace their on-board shop's gas cylinders in a foreign port. However, there are no international standards for cylinder sizes and shapes, and from trying to assist people on this forum there are a bewildering variety of them. So the valves are the same, but what size tank you will need to buy is a question you'll need to research specific to the country you're in. You'll need at least 40 minutes of gas flowing at 15Lpm, so the tank must contain a minimum of 600L of compressed gas.
In the US, a cheap CO2/Ar regulator (will also work adequately for N2) is available from Harbor Freight Tools, but I doubt that company ships internationally. Again, you'll need to look around for local resources. The critical componant, as far as I've seen, is making sure it has a flowmeter marked in liters per minute. Many regulators are only marked in cubic feet per hour, intended for low-flow welding operations, and as such they do not provide a high enough flow rate for use with an exit bag.
I admit, after hearing how He is so often diluted, I never even considered it for my exit. I went straight to N2.But the only ones sold in Europe normal stores say that you get 30 balloons from it and euthanasia site said that it's enough.
No, no vomiting. At least I haven't experienced that, and I've tried to ctb with N2 three times in the last month. It's no different from breathing --no funny smell, even-- but eventually your hands and face go tingly and you black out. At least I'm assuming you black out: I was a coward and pulled the bag off after my vision went grey around the edges.guys i want to know if nitrogen can make vomits because i hate it
thank you for that, and i feel you :( that sucks, i think like you, i'm a coward too i hate life but still here wasting my timeI admit, after hearing how He is so often diluted, I never even considered it for my exit. I went straight to N2.
No, no vomiting. At least I haven't experienced that, and I've tried to ctb with N2 three times in the last month. It's no different from breathing --no funny smell, even-- but eventually your hands and face go tingly and you black out. At least I'm assuming you black out: I was a coward and pulled the bag off after my vision went grey around the edges.
Thank you. I needed that levity.They want me to review it! Should I say it's not fit for purpose?
They want me to review it! Should I say it's not fit for purpose? View attachment 4649
Your humorous posts always bring a smile to my face. :D
Thanks, I'm glad it has that effect.Your humorous posts always bring a smile to my face. :D