Found SN and purified it

[prototypian]

A local, easy to shop at, store for hunting supplies had SN as a curing salt for making cured meats like beef jerky. I won't say where I am or where the store is but I was able to buy it easily. I felt good purchasing it and having the clerk just ask me if I was part of their rewards program. I have it now and a gun. Just thinking about direction.

 

[LaVieEnRose]

It may not be pure enough.

 

[heydude56]

If it's curing salt it might not be pure

 

[Macedonian1987]

Usually curing salts have just 6% of SN in them and you need your SN to be at least 95% pure.

 

[prototypian]

I did four rectyatalizations from hot water rapidly cooled with an ice bath filtering the crystals that fell out of solution first then repeating. The Mel temp (melting temperature) started out at 470 c as a mixture of sodium chloride, nitrate and nitrite salts. With each recrystalization the temperature fell for the Mel temp of the resulting crystals until I got down to 275 for the melt temperature. That's close to the temp for pure at 271 c. I'm confident I have pretty pure crystals. The color also changed from pinkish to an off yellow white color which matches the reports. I feel I have the pure stuff now.

 

[RimeOfTheAncient]

Anyway you would make a full guide? This could be the main way getting SN going forwards with all the bans. Also will you test it with anything more then a melting point test?

 

[prototypian]

The only tool I have is Mel temp at the local college lab. I could titrate potentially but I've always been very comfortable with Mel temp for purity. We made benzocaine in an undergrad organic lab and it was the only thjng we were allowed to taste that we made since the tiny dab of it caused the spot on your tongue to go numb.

Despit all the accuracy we could do with tlc plates for purity (we didn't have a nmr then) the best way was with Mel temp. Any significant deviation was impure.

Since this is a salt and I recrystalized it multiple times from the original mixture I'm confident in the results for me. Given its intended purpose there is not a concern I have about slight impurities.

 

[At The Bus Stop]

The only tool I have is Mel temp at the local college lab. I could titrate potentially but I've always been very comfortable with Mel temp for purity. We made benzocaine in an undergrad organic lab and it was the only thjng we were allowed to taste that we made since the tiny dab of it caused the spot on your tongue to go numb.

Despit all the accuracy we could do with tlc plates for purity (we didn't have a nmr then) the best way was with Mel temp. Any significant deviation was impure.

Since this is a salt and I recrystalized it multiple times from the original mixture I'm confident in the results for me. Given its intended purpose there is not a concern I have about slight impurities.

Are you able to send a small sample off to be tested? or possibly find a way of testing it's purity yourself. Would be cool to know the official purity of your experiment.