Bought a drager eebd but can’t exhale through valve..

[Willthishelp?]

There is no way to breath air from the valve.. and if I blow really hard on the hose nothing happens..
this hood was recommended by knowledgeable member to me but now I'm scared it won't work and was € 250!..

 

[The Burning Fool]

Do you expect your lungs to be as strong as the pressure inside a gas cylinder?

 

[Willthishelp?]

But how to exhale the oxygen.. there is no outlet for that or does it need to go out underneath?

 

[The Burning Fool]

But how to exhale the oxygen.. there is no outlet for that or does it need to go out underneath?

Have you tried putting on the hood and breathing out? The air escapes through minor gaps, doesn't it?

 

[Willthishelp?]

Yes well nog gap in neck area.. does not fit tight..now it's like exit bag but very expensive one..

 

[The Burning Fool]

Yes well nog gap in neck area.. does not fit tight..now it's like exit bag but very expensive one..

I mean, overpressure would make the gas flow in through the valve or whatever, and out through the gaps near the neck. I see no problem with its effectiveness. Cmiiw.

 

[Willthishelp?]

But wouldn't there be to much oxygen in the hood, this way it's like an exit bag and lots of failures with that

 

[The Burning Fool]

But wouldn't there be to much oxygen in the hood, this way it's like an exit bag and lots of failures with that

Idk, there's the danger of permanent brain damage, so yeah, I'd research further.

 

[Willthishelp?]

Idk, there's the danger of permanent brain damage, so yeah, I'd research further.

 

[Das Nichts]

But wouldn't there be to much oxygen in the hood, this way it's like an exit bag and lots of failures with that

If oxygen would cause brain damage that would explain a lot of posts on social media.

 

[Willthishelp?]

If oxygen would cause brain damage that would explain a lot of posts on social media.

Can you explain further? Will my method work, it's just like exit bag..

 

[Das Nichts]

Can you explain further? Will my method work, it's just like exit bag..

The exhalation valve is there to purge CO2 from the hood. CO2 is the end product if air is consumed by your body and it's exhaled through your mouth.

If the exhalation valve on your Hood does not work don't attempt to ctb. Get a replacement from the vendor!

 

[Willthishelp?]

The exhalation valve is there to purge CO2 from the hood. CO2 is the end product if air is consumed by your body and it's exhaled through your mouth.

If the exhalation valve on your Hood does not work don't attempt to ctb. Get a replacement from the vendor!

Do you know a good hood that indeed has exhalation valve?

 

[Das Nichts]

Do you know a good hood that indeed has exhalation valve?

The one you posted has one, It might just not work.

 

[Willthishelp?]

The one you posted has one, It might just not work.

It's new..

Do you know another hood with rectus male connection? 95KSIW13BPN

 

[Meditation guide]

It's new..

Do you know another hood with rectus male connection? 95KSIW13BPN

I'm going to add in my thoughts on this whole setup. Yes there will be oxygen in that hood when you put it on. So you will be mixing oxygen with nitrogen and breathing that in. You will also be exhaling carbon dioxide. I don't logically see how you can escape risking brain damage with this setup.

If that hood was used to provide oxygen in an environment where there is smoke it might work for that, assuming you could exhale and somehow the carbon dioxide in your exhalation would escape but for your purpose, you need to not try to use that hood.

Just having a high nitrogen content mixed in with oxygen will give brain damage. In my studied opinion the nitrogen method should never be used. Much too risky and hard to pull off.

 

[Willthishelp?]

I'm going to add in my thoughts on this whole setup. Yes there will be oxygen in that hood when you put it on. So you will be mixing oxygen with nitrogen and breathing that in. You will also be exhaling carbon dioxide. I don't logically see how you can escape risking brain damage with this setup.

If that hood was used to provide oxygen in an environment where there is smoke it might work for that, assuming you could exhale and somehow the carbon dioxide in your exhalation would escape but for your purpose, you need to not try to use that hood.

Just having a high nitrogen content mixed in with oxygen will give brain damage. In my studied opinion the nitrogen method should never be used. Much too risky and hard to pull off.

But exit bags do work right?
Just spend 900 on method Gasmonkey advised me.. and won't work I am screwed.. will loose my house and everything.. still want to try it..

 

[outrider567]

I'm going to add in my thoughts on this whole setup. Yes there will be oxygen in that hood when you put it on. So you will be mixing oxygen with nitrogen and breathing that in. You will also be exhaling carbon dioxide. I don't logically see how you can escape risking brain damage with this setup.

If that hood was used to provide oxygen in an environment where there is smoke it might work for that, assuming you could exhale and somehow the carbon dioxide in your exhalation would escape but for your purpose, you need to not try to use that hood.

Just having a high nitrogen content mixed in with oxygen will give brain damage. In my studied opinion the nitrogen method should never be used. Much too risky and hard to pull off.

Please show on Google where someone used an EEBD Hood to CTB with with Nitrogen and it failed--Greenberg challenged anybody to find just one example, and nobody could--Likewise, with GasMonkey--Please read Greenberg's posts pages 40 to 70 on the Inert Gas Mega Thread to get properly educated on this subject, and spare us 'your thoughts', you obviously know very little about Nitrogen and the EEBD Hood to make such an ignorant statement like 'the Nitrogen Method should never be used'

 

[Willthishelp?]

Please show on Google where someone used an EEBD Hood to CTB with with Nitrogen and it failed--Greenberg challenged anybody to find just one example, and nobody could--Likewise, with GasMonkey--Please read Greenberg's posts pages 40 to 70 on the Inert Gas Mega Thread to get properly educated on this subject, and spare us 'your thoughts', you obviously know very little about Nitrogen and the EEBD Hood to make such an ignorant statement like 'the Nitrogen Method should never be used'

But also we can not find succeeded attempts .. that's the thing.. and my drager hood is no good .. and need to ctb fast..

 

[x0nSS]

Exit bag works fine when made right. Just avoid argon because of weight. Nitrogen and Exit bag are proven.