The DIY DEBREATHER IS COMING

[NextBusLeaving]

"We take back the right to die from the corrupt! The rich! The oppressors of generations who have kept you down with myths like "it will get better," and we give it back to you... the people. The ability to die is yours. None shall interfere. Do as you please. Start by storming Exit International, and freeing the oppressed!"

- Bane

 

[Ruinedmylif]

Good to hear how far out are you at completing

 

[R_N]

I have to admit that debreather reminded me of Bane too lol.

 

[NextBusLeaving]

Good to hear how far out are you at completing

Waiting on one order or two of supplies before I can assemble and test as a unit. Not sure about legality of disseminating construction plans but that would be a goal.

 

[NextBusLeaving]

"The DIY debreather is armed! The DIY debreather is MOBILE! And the identity of the triggerman is a MYSTERY!" - Bane

Finished assembly and tested last night. Successful in drawing my pulse ox down from 98% to 82% in under ten mins. That's just holding the mask on, not attached as I didnt want an accident if I blacked out.

Under a hundred bucks to make and took about an hour once I had everything. Most supplies sourced from jungle site.

Folks, shit just got real. It is now safely stowed in case of emergency.

 

[theguineapigking]

Congratulations. I'm happy you found something that should work painlessly. I hope you find peace one way or another. If it comes to using it,good luck!

 

[pthnrdnojvsc]

"The DIY debreather is armed! The DIY debreather is MOBILE! And the identity of the triggerman is a MYSTERY!" - Bane

Finished assembly and tested last night. Successful in drawing my pulse ox down from 98% to 82% in under ten mins. That's just holding the mask on, not attached as I didnt want an accident if I blacked out.

Under a hundred bucks to make and took about an hour once I had everything. Most supplies sourced from jungle site.

Folks, shit just got real. It is now safely stowed in case of emergency.

Congratulations! Any weblinks or detailed plans you can share with us on your debreather would be appreciated .

 

[Brick In The Wall]

Whoever has the balls to actually be the first to CTB via a homemade debreather is a fucking pioneer. I don't think I could trust my own craftsmanship on something like this.

 

[NextBusLeaving]

Congratulations! Any weblinks or detailed plans you can share with us on your debreather would be appreciated .

I am trying to figure out how to disseminate them without legal ramifications.

Its surprisingly simple and built from PVC pipe mostly.

Whoever has the balls to actually be the first to CTB via a homemade debreather is a fucking pioneer. I don't think I could trust my own craftsmanship on something like this.

Thats the thing...if i produce plans for this it will make you the instrument of your own liberation. Show you step by step how to get same results. ;)

 

[Brick In The Wall]

I am trying to figure out how to disseminate them without legal ramifications.

Its surprisingly simple and built from PVC pipe mostly.

Thats the thing...if i produce plans for this it will make you the instrument of your own liberation. Show you step by step how to get same results. ;)

I commend you for your efforts. I have many means of self deliverance. However, it never hurts to have options in life!

 

[NextBusLeaving]

I commend you for your efforts. I have many means of self deliverance. However, it never hurts to have options in life!

As do I lol. I like that this is completely painless and even relaxing...there was something comforting about the gentle clicking of the one-way valves and the expansion and contraction of the counterlung. I am about to toss most of my SN.

 

[Brick In The Wall]

As do I lol. I like that this is completely painless and even relaxing...there was something comforting about the gentle clicking of the one-way valves and the expansion and contraction of the counterlung. I am about to toss most of my SN.

To each their own. I collect methods like pokemon cards. When the time is right I have no idea what will appeal to me the most.

 

[TAW122]

"The DIY debreather is armed! The DIY debreather is MOBILE! And the identity of the triggerman is a MYSTERY!" - Bane

Finished assembly and tested last night. Successful in drawing my pulse ox down from 98% to 82% in under ten mins. That's just holding the mask on, not attached as I didnt want an accident if I blacked out.

Under a hundred bucks to make and took about an hour once I had everything. Most supplies sourced from jungle site.

Folks, shit just got real. It is now safely stowed in case of emergency.

I'm so happy to hear that. You have a reliable way to escape and having the means can sometimes make someone feel at peace and calm. I wish you the best and hope that you will find peace in whatever you choose down the road.

 

[Ἡγησίας]

Do you want a medal?

 

[Brick In The Wall]

Do you want a medal?

I think they deserve one for the effort and consideration. But shit, if you're handing them out lemme get one too!

 

[NextBusLeaving]

Do you want a medal?

Sure lol. I am just surprised it worked. Its taken Exit 17 years. ;)
How many here would be interested if i made plans available? Any idea where to host them?

 

[overandout]

Sure lol. I am just surprised it worked. Its taken Exit 17 years. ;)
How many here would be interested if i made plans available? Any idea where to host them?

I Would definitely be interested, hard work paid off, bravo!

 

[Brick In The Wall]

Sure lol. I am just surprised it worked. Its taken Exit 17 years. ;)
How many here would be interested if i made plans available? Any idea where to host them?

17 years!? Talk about redundancy. If you're serious about this you need to run a full spectrum of tests and make an elaborate guide first. Then you can worry about where to host it.

 

[Ruinedmylif]

Sure lol. I am just surprised it worked. Its taken Exit 17 years. ;)
How many here would be interested if i made plans available? Any idea where to host them?

Definitely interested in this asap!! Thank you

 

[lmroch]

Its taken Exit 17 years

Yesterday I was reading info I have saved.. Seems Exit had nothing to do with the development of the Debreather.

"The Debreather co-won the NuTech Assisted Suicide Prize for innovation in end of life technologies in Toronto. The DeBreather was initially conceived by BC Euthanasia Activist John Hofsess in the late 1990's. The new version of the Debreather builds on Hofsess' ground-breaking work to provide a device that enables a seriously ill/ elderly person to have a peaceful and reliable death at a time of their choosing. DeBreather, US designed winner of the 2017 Exit NuTech prize for technological innovation in providing better DIY elective death."

 

[NextBusLeaving]

Do you want a medal?

I just thought folks might like an option they can source with little hassle and no big outlay. :)

Yesterday I was reading info I have saved.. Seems Exit had nothing to do with the development of the Debreather.

"The Debreather co-won the NuTech Assisted Suicide Prize for innovation in end of life technologies in Toronto. The DeBreather was initially conceived by BC Euthanasia Activist John Hofsess in the late 1990's. The new version of the Debreather builds on Hofsess' ground-breaking work to provide a device that enables a seriously ill/ elderly person to have a peaceful and reliable death at a time of their choosing. DeBreather, US designed winner of the 2017 Exit NuTech prize for technological innovation in providing better DIY elective death."

Yes, i see that now. I just know in my preliminary research i found references to Exit talking about it back to 2002. I dont know specifics of why it took so long.

 

[pthnrdnojvsc]

Its surprisingly simple and built from PVC pipe mostly.

Thats the thing...if i produce plans for this it will make you the instrument of your own liberation. Show you step by step how to get same results. ;)

Sure lol. I am just surprised it worked. Its taken Exit 17 years. ;)
How many here would be interested if i made plans available? Any idea where to host them?

I am definitely interested. You can put the plans for your debreather in the resources compilation thread for this Sanctioned Suicide website . Wordpress.com and blogspot.com are also 2 easy to use blogging platforms. Or we can discuss the plans further in pm or proton mail if u can send me a draft w web links And quick instructions.

 

[NextBusLeaving]

17 years!? Talk about redundancy. If you're serious about this you need to run a full spectrum of tests and make an elaborate guide first. Then you can worry about where to host it.

What kind of tests would you want to see included in a package/guide?

I see the R2D design was tested by some volunteers who took pulse ox readings down to the 70s or 80s % and by "burning a candle in a sealed box with a debreather attached" or something.

 

[Brick In The Wall]

Do you want a medal?

I just thought folks might like an option they can source with little hassle and no big outlay. :)

I hereby award you the very prestigious honor for your work in the field!

 

[NextBusLeaving]

Do you want a medal?

Actually just celebrating a bit here lol. Its not the type of "accomplishment" you can share with most ppl.

"Hey i made a death box!"
"Oh good for you!"

Lol

 

[Lastsauce]

To each their own. I collect methods like pokemon cards. When the time is right I have no idea what will appeal to me the most.

I've got two, an exit bag and a premium exit bag with thick comfy elastic cord and a Mercedes AMG sticker.

 

[NextBusLeaving]

I've got two, an exit bag and a premium exit bag with thick comfy elastic cord and a Mercedes AMG sticker.

Lol I have SN and now this.

 

[liverpoolfan]

Is this something that could be converted for use with a 3-D printer? Now that would be a game changer
They're not about to ban 3-printers so thus could potentially help millions of people and there'd be fuck all LE could do about it.
Well don't on your prototype and please think seriously about figuring out a method of converting it to a a 3-D printable format.

 

[NextBusLeaving]

Is this something that could be converted for use with a 3-D printer? Now that would be a game changer
They're not about to ban 3-printers so thus could potentially help millions of people and there'd be fuck all LE could do about it.
Well don't on your prototype and please think seriously about figuring out a method of converting it to a a 3-D printable format.

Its easier than that. You can make 90% of it from pvc pipe. They're certainly not going to ban Indoor Plumbing! ;)

 

[liverpoolfan]

That's certainly better for many people who are handy and, more importantly, don't have access to or can't afford 3-D printing.
However, for lazy un-coordinated people like me, a pro-looking kit available at a touch of a button would be far preferable. Especially if you could emboss it with some personalised emblem - like the grim reaper.... Or the Liverbird