Help with the Exit Bag and Helium Tank Solution

[candyman]

Can somebody give me instructions how to connect my exit bag to my helium cylinder via IM? Else... maybe instructions where to find Nembutal from D.

Connecting a solid tube that doesn't lose any helium from the cylinder to inside the mask, would be great.

I have:
- 2 Helium Tank for 30 Balloons (2x Helium Tank Voor 30 Ballonnen - Partywinkel nl)
- A CPAP mask with a tube/hose that doesn't fit the helium tanks
- An exit bag with some elastics

I've been in pain, disabled for a year, unable to walk without hope for recovery, so I have to have products delivered to my home.

I can upload some photos of the equipment to imgur.com, but I'm not sure if that violates the site's regulations.

 

[Greenberg]

Do you have a regulator?

 

[jodes2]

D isn't contactable at the moment. Don't fall for scam email addresses that are circulating, always get the email from a verified copy of the ppeh. There are even modified copies of the ppeh about with scam email addresses floating around, it's incredible how hard it is to get N

 

[Hollowillow]

Can somebody give me instructions how to connect my exit bag to my helium cylinder via IM? Else... maybe instructions where to find Nembutal from D.

Connecting a solid tube that doesn't lose any helium from the cylinder to inside the mask, would be great.

I have:
- 2 Helium Tank for 30 Balloons (2x Helium Tank Voor 30 Ballonnen - Partywinkel nl)
- A CPAP mask with a tube/hose that doesn't fit the helium tanks
- An exit bag with some elastics

I've been in pain, disabled for a year, unable to walk without hope for recovery, so I have to have products delivered to my home.

I can upload some photos of the equipment to imgur.com, but I'm not sure if that violates the site's regulations.

I feel for you, I don't have a wheelchair but was messed up when I got hit by a car... Still am for various reasons. Your way is too hard for me, but I hope a guide will answer soon. Best wishes of success.

 

[candyman]

Do you have a regulator?

No, I didn't know which one would fit. There's so many different types.

 

[Hollowillow]

No, I didn't know which one would fit. There's so many different types.

I'm so confused too, I wish we could buy ctb kits

 

[Greenberg]

No, I didn't know which one would fit. There's so many different types.

Which country are you located? Different regions have different connection standards. You would need a regulator to match the cylinder connection standard of your country.

 

[Someone123]

Helium that is sold for balloons usually has 20% oxygen in it to prevent ctb- there is helium for industrial purposes that is pure helium, but it is not as easy to get. So make sure you have pure helium if you try this method, because the other helium won't work. I hope you can find peace. :)

 

[candyman]

Which country are you located? Different regions have different connection standards. You would need a regulator to match the cylinder connection standard of your country.

The Netherlands

I bought 2x BalloonGaz Helium Tank Voor 30 Ballonnen with a slang zonder drukmeetslang:

- Lengte: 180 cm Diameter: 15mm Geschikt voor Resmed S9, Resmed Airsense 10, (Philips) Dreamstation

But the hose doesn't fit...
I don't know anything about screws, threads and gas tanks. I'm reading about a helium regulator G5/8 thread depth...

Does that mean I need to buy a 8mm male to 15 female connector to connect them both?

 

[Someone123]

Helium that is sold for balloons usually has 20% oxygen in it to prevent ctb- there is helium for industrial purposes that is pure helium, but it is not as easy to get. So make sure you have pure helium if you try this method, because the other helium won't work. I hope you can find peace. :)

This is in the U.S.- in other countries it could be different.

 

[Greenberg]

The Netherlands

I bought 2x BalloonGaz Helium Tank Voor 30 Ballonnen with a slang zonder drukmeetslang:

- Lengte: 180 cm Diameter: 15mm Geschikt voor Resmed S9, Resmed Airsense 10, (Philips) Dreamstation

But the hose doesn't fit...
I don't know anything about screws, threads and gas tanks. I'm reading about a helium regulator G5/8 thread depth...

Does that mean I need to buy a 8mm male to 15 female connector to connect them both?

Check in my blog. I seem to remember that the Netherlands standard is identical to the German standard. Best, G

 

[candyman]

So the hose didn't fit on the helium tank, I bought 2x BalloonGaz Helium Tank Voor 30 Ballonnen with a slang zonder drukmeetslang:

This hose didn't fit, it's too wide:

• Lengte: 180 cm Diameter: 15mm Geschikt voor Resmed S9, Resmed Airsense 10, (Philips) Dreamstation

I've also bought these 2 products:

• Air hose - Crystal type - per 1 Meter - Pvc - Transparent Clear 9-12mm hose
  Original language: Luchtslang - Type Kristal - per 1 Meter - Pvc - Transparant Blank 9-12mm slang
• BOTC Hose Clamps Set - Stainless Steel Hose Clamp - Ø 8-38mm - 60 Pieces
  Original language: BOTC Slangklemmen Set - RVS slangklem - Ø 8-38mm - 60 Delig

This air hose does fit on the Helium Tank outlet, but I'd have to use the hose clamp to make sure it's on tight. It's also just 1 meter, but that could work fine.

I could also buy the "DIN 477 / BS341 Nr.8 / W21.8-14 Aansluitslang - 1 Meter"-hose instead of the air hose and the hose clamp. If it fits, it should fit on much stronger than the plastic PVC hose + Hose Clamp.

• Can I post links to the webshop with the din 477 hose and other products I've purchased, so you can see the specifications of the products? I'm not sure that breaks the rule on "no sourcing", as I'm not sourcing helium or nembutal, but just the hardware required for the helium exit bag set-up.
• Can I upload photos from www.imgur.com of my set-up and share them here?

 

[Obliviate]

Hi, first is your helium of high purity?

 

[Greenberg]

So the hose didn't fit on the helium tank, I bought 2x BalloonGaz Helium Tank Voor 30 Ballonnen with a slang zonder drukmeetslang:

This hose didn't fit, it's too wide:

• Lengte: 180 cm Diameter: 15mm Geschikt voor Resmed S9, Resmed Airsense 10, (Philips) Dreamstation

I've also bought these 2 products:

• Air hose - Crystal type - per 1 Meter - Pvc - Transparent Clear 9-12mm hose
  Original language: Luchtslang - Type Kristal - per 1 Meter - Pvc - Transparant Blank 9-12mm slang
• BOTC Hose Clamps Set - Stainless Steel Hose Clamp - Ø 8-38mm - 60 Pieces
  Original language: BOTC Slangklemmen Set - RVS slangklem - Ø 8-38mm - 60 Delig

This air hose does fit on the Helium Tank outlet, but I'd have to use the hose clamp to make sure it's on tight. It's also just 1 meter, but that could work fine.

I could also buy the "DIN 477 / BS341 Nr.8 / W21.8-14 Aansluitslang - 1 Meter"-hose instead of the air hose and the hose clamp. If it fits, it should fit on much stronger than the plastic PVC hose + Hose Clamp.

• Can I post links to the webshop with the din 477 hose and other products I've purchased, so you can see the specifications of the products? I'm not sure that breaks the rule on "no sourcing", as I'm not sourcing helium or nembutal, but just the hardware required for the helium exit bag set-up.
• Can I upload photos from www.imgur.com of my set-up and share them here?

Please confirm that your balloon helium is indeed 100% helium and not doped with oxygen or air. Best, G

 

[giannividi]

Any update candyman? I bought Helium from the same story and I'm facing the same issues. Can't hook to mask to the tank.