According to this, the average tensile strength of polypropylene is 35,7MPa. I will consider 30MPa. If the diameter is 8mm, the area is around 50mm², so, it can handle about 1500N or 150kg without breaking. But don't trust me, my head is a bit heavy right now and I may have miscalculated it.
The post above made an important consideration as well.
According to this, the average tensile strength of polypropylene is 35,7MPa. I will consider 30MPa. If the diameter is 8mm, the area is around 50mm², so, it can handle about 1500N or 150kg without breaking. But don't trust me, my head is a bit heavy right now and I may have miscalculated it.
The post above made an important consideration as well.
I am planning on using full suspension. My rope is 5/8" ( about 16 mm), made from hemp. It is soft and strong, similar to the rope used in executions. I was able to purchase it from a boating supply. From what I had read synthetic materials have too much stretch to work well which is why I went with the hemp.
I am planning on using full suspension. My rope is 5/8" ( about 16 mm), made from hemp. It is soft and strong, similar to the rope used in executions. I was able to purchase it from a boating supply. From what I had read synthetic materials have too much stretch to work well which is why I went with the hemp.
Rope is designed to handle more 50kg and more, I'd say well over 120kg would be max that so you'll be fine.
I have a climbing rope, good wide, will take my body.
It takes a lot to commit ctb by rope. Bravery in the face of fear pain SI but then PEACE. Once you're ready and if not fine it's fine, all here for you
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.